DTC Advanced Diagnostics: U3000-49
DTC U3000-49:CAN Gateway Internal Failure

General Description

The CAN gateway performs on-board self-diagnosis to prevent transferring erroneous information when there is a malfunction in the CPU. If the CAN gateway detects a malfunction in the CPU, a DTC is stored.

Monitor Execution, Sequence, Duration, DTC Type
Execution
Immediately after the vehicle is turned to the ON mode, Continuous
Sequence
None
Duration
–
DTC Type
One drive cycle, MIL on or off (CAN gateway does not output MIL on/off request)

Enable Conditions
Condition
Minimum
Maximum
12 volt battery voltage [BATTERY]
9.5 V
–
Vehicle
ON mode
[ ]: HDS Parameter

Malfunction Threshold
The CAN gateway detects a malfunction in the CPU.

Possible Cause
NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
CAN gateway internal failure

Diagnosis Details
Conditions for setting the DTC
When a malfunction is detected, a Pending DTC, a Confirmed DTC, and the freeze data are stored in the CAN gateway memory.

Conditions for clearing the DTC
The Pending DTC, the Confirmed DTC, and the freeze data can be cleared with the scan tool Clear command.