Front Door Panel Removal and Installation
1. Front Door Power Window Switch Panel - Remove
1.
Pry out on the notch (A) in the power window switch panel (B) with the trim tool.
2.
Disconnect the connectors (C), then remove the power window switch panel.

2. Front Door Panel - Remove
1.
Remove the screw.
2.
Starting at the bottom edge of the front door panel (A), remove the clips (B, C) with a commercially available trim pad remover.
3.
Starting at the rear, pull the door panel upward.
4.
For some models: Disconnect the connector (D).

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.