Rear Door Panel Removal and Installation
1.
Rear Door Power Window Switch Panel - Remove
1.
Pry out on the notch (A) in the power window switch panel (B) with the trim tool.
2.
Disconnect the connectors (C).
3.
For some models: Disconnect the connectors (D).
4.
Remove the power window switch panel.
2.
Rear Door Panel - Remove
1.
Remove the screw.
2.
Starting at the bottom edge of the rear door panel (A), remove the clips (B, C) with a commercially available trim pad remover.
3.
For some models: Disconnect the connector (D) and harness clip (E).
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.