Grab Handle Removal and Installation
1. Grab Handle - Remove


1.
Lower the grab handle (A).

2.
Remove the caps (B).

3.
Squeeze the clips (C) with pliers, then remove the grab handle.

1. Grab Handle - Check

1.
If the side curtain airbag has not deployed, inspect the grab handle (A) for damage. A damaged grab handle may cause the side curtain airbag to deploy improperly, possibly causing injury. Replace the grab handle if it has any of the following damage:

Any cracks or breakage in the grab handle
Any cracks or stress-whitening in the caps (B)

1. Grab Handle - Install


1.
Position the grab handle (A) on the grab handle bracket (B).

2.
Push on the grab handle until the clips (C) snap into place securely.

3.
Install the caps (D) fully into the clips.