Mirror Holder Removal and Installation
Mirror Holder Type 1
1.
Mirror Holder - Remove
1.
Carefully push on the top edge of the mirror holder (A) by hand.
2.
Put a shop towel in the opening between the bottom edge of the mirror holder and the mirror housing (B) to prevent scratches.
3.
Insert a flat-tip screwdriver under the mirror holder, and twist the screwdriver to release the hooks (C).
4.
Separate the mirror holder (A) from the actuator (B).
5.
For some models: Disconnect the connectors (C).
2.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal, check the actuator operation
Mirror Holder Type 2
1.
Mirror Holder - Remove
1.
Carefully push on the top edge of the mirror holder (A) by hand.
2.
Put a shop towel in the opening between the bottom edge of the mirror holder and the mirror housing (B) to prevent scratches.
3.
Insert a flat-tip screwdriver under the mirror holder, and twist the screwdriver to release the hooks (C).
4.
Separate the mirror holder (A) from the actuator (B).
5.
For some models: Disconnect the connectors (C).
2.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal, check the actuator operation
