Front Seat-Back Cover Removal and Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

2. Front Seat-Back Cover/Pad - Remove
1.
From under the seat cushion, release the elastic strap (A) from the seat cushion frame springs (B).




Driver's seat

Passenger's seat
2.
With seat heater: Disconnect the connector (A).
3.
From under the seat cushion, remove the harness clips (B).
4.
Release the hooks (C) of the seat cushion cover.




Driver's seat

Passenger's seat
5.
Pull out the wire harness(es) (A) and the seat-back cover (B) between the seat cushion pad (C) and the seat frame (D).
6.
Release the hook strip (A).
7.
Unzip the seat-back cover (B).
8.
Release the hooks (A).
9.
With seat heater: Remove the harness holder (B).
11.
Remove the head restraint guides (A).
12.
Remove the clips (A) of the reinforcing cloth.
13.
Remove the seat-back cover/pad (A).

3. Front Seat-Back Cover - Remove
1.
Remove the upholstery rings (A), and then remove the seat-back cover (B).

4. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
Replace all of the upholstery rings (A) fastening the seat-back cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).
Push the clips (E) of the reinforcing cloth until they snap into place securely.