Front Seat Recline Cover Removal and Installation
NOTE:
How to read the torque specifications
.
SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
1.
Front Seat - Remove
2.
Height Adjuster Handle - Remove (Driver's Manual Seat)
1.
Remove the cap (A).
2.
Remove the nut (B), the wave washer (C), the washer (D), the height adjuster handle (E), and the detent plate (F).
3.
Front Seat Outer Recline Cover - Remove
Driver's power seat
Driver's manual seat
Passenger's power seat
Passenger's manual seat
1.
Manual seat: Remove the front seat recline knob (A).
2.
Remove the front seat outer recline cover (B).
3.
Power seat: Disconnect the connector(s) (C).
4.
Driver's power seat: Remove the harness clip (D).
4.
Front Seat Inner Recline Cover - Remove
Driver's seat
Passenger's seat
5.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.