TPMS Switch Removal, Installation, and Test
1.
Driver's Dashboard Undercover - Remove
2.
Driver's Dashboard Lower Cover- Remove
3.
TPMS Switch - Remove
NOTE: Position of the switch is different depending on the model.
4.
All Removed Parts - Install
1.
Install all removed parts in the reverse order of removal.
1.
TPMS Switch - Test
TPMS switch 5P connector (male terminals)
1.
On the switch side, check for continuity between the connector terminal in each switch position according to the table.
2.
If the switch does not work as described in the table, replace the switch.
