MAP Sensor/MAF Sensor/IAT Sensor Removal and Installation
NOTE: Although a numbered sequence is shown, these "*1" indicated parts are separate components. If removal or replacement of one of the components is needed, it is not necessary to remove the other.
1
MAP Sensor*1
Torque: N·m (kgf·m, lbf·ft)
Replace
2
MAF Sensor/IAT Sensor 1*1
Torque: N·m (kgf·m, lbf·ft)
Replace
3
IAT Sensor 2*1
Torque: N·m (kgf·m, lbf·ft)
Replace
MAP Sensor
1.
MAP Sensor - Remove
2.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal with a new O-ring.
MAF Sensor/IAT Sensor 1
1.
MAF Sensor/IAT Sensor 1 - Remove
2.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal with a new O-ring.
IAT Sensor 2
1.
IAT Sensor 2 - Remove
2.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal with a new O-ring.