ECT Sensor Removal and Installation
NOTE: Although a numbered sequence is shown, these "*1" indicated parts are separate components. If removal or replacement of one of the components is needed, it is not necessary to remove the other.
1
ECT Sensor 1*1
Torque: N·m (kgf·m, lbf·ft)
Replace
2
ECT Sensor 2*1
Torque: N·m (kgf·m, lbf·ft)
Replace
ECT Sensor 1
1.
Engine Coolant - Drain
2.
ECT Sensor 1 - Remove
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal with a new O-ring.
ECT Sensor 2
1.
Front Engine Undercover Lid - Remove
2.
Engine Coolant - Drain
3.
ECT Sensor 2 - Remove
4.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal with a new O-ring.