Ignition Coil and Spark Plug Removal and Installation

1


1806_3.0_enu_14740906_5.0

enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)


NOTE: Remove the necessary part(s).

2. Ignition Coil - Remove


3. Spark Plug - Remove


4. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: When installing the spark plugs, apply a small amount of anti-seize compound to the spark plug threads, and screw the spark plugs into the cylinder head, finger-tight, then tighten the spark plugs to the specified torque.

5. Maintenance Minder - Reset (With Maintenance Minder System)
1.
If the Maintenance Minder required to replace the spark plugs, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder").