Side Engine Mount Removal and Installation
1
Torque: N·m (kgf·m, lbf·ft)
Replace
1.
Engine Undercover Lid - Remove
2.
Engine - Support
1.
Lift and support the engine with a jack and a wood block under the oil pan.
3.
Upper Torque Rod - Remove
4.
Expansion Tank - Move
NOTE: Do not disconnect the water bypass hoses.
5.
Expansion Tank Bracket - Remove
6.
Dynamic Dumper - Remove
7.
Ground Cable - Disconnect
8.
Side Engine Mount Bracket - Remove
9.
Side Engine Mount - Remove
10.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
Do the mounts tightening procedure before tightening all of the mounts' bolts and nuts.