Install the parts in the reverse order of removal.
1.
Oil Jet - Inspect
1.
Make sure that a 1.0 mm (1/32 in) diameter pin will go through the nozzle hole (A) (1.2 mm (0.047 in) diameter).
NOTE: Replace the oil jet, if the nozzle is damaged or bent.
2.
Make sure that a 1.8 mm (1/16 in) diameter pin will go through the oil intake (B) (2.0 mm (0.079 in) diameter), and the check ball (C) moves smoothly and has a stroke of about 2.0 mm (0.079 in).
