CVT Speed Sensor Removal and Installation
NOTE:
Keep all foreign particles out of the transmission.
Unless otherwise indicated, illustrations used in the procedure are for 1.5 L engine.
1
Torque: N·m (kgf·m, lbf·ft)
Replace
CVT Speed Sensor
1.
12 Volt Battery - Remove
2.
Throttle Body Duct - Remove
3.
CVT Speed Sensor - Remove
4.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
Be sure to use a new O-ring which should be applied a light coat of clean transmission fluid before installation.
Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.
CVT Drive Pulley Speed Sensor
1.
Air Cleaner - Remove
2.
CVT Drive Pulley Speed Sensor -Remove
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
Be sure to use a new O-ring which should be applied a light coat of clean transmission fluid before installation.
Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.
Torque Converter Turbine Speed Sensor
1.
Vehicle - Lift
2.
Front Engine Undercover Lid - Remove
3.
Torque Converter Turbine Speed Sensor - Remove
4.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
Be sure to use a new O-ring which should be applied a light coat of clean transmission fluid before installation.
Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.