CVTF Warmer Hose Removal and Installation

NOTE:
enu_12713377_2.0 Where icon is shown, click for further information.
Unless otherwise indicated, illustrations used in the procedure are for 1.5 L engine.


1


3230_3.0_enu_14779223_8.0

enu_12713377_2.0
Detailed information, notes and precautions

4. CVTF Warmer Hose - Disconnect

NOTE:
When disconnecting/connecting the hoses, do not bend the warmer pipes excessively, or they will be damaged or deformed.
To prevent damage, cover the connector located under the CVTF warmer using a shop towel.

5. CVTF Warmer Hose - Connect
1.
Connect the CVTF warmer inlet hose and outlet hose to each bulge of the CVTF warmer lines by aligning the paint marks (A) on the lines with the paint marks (B) on the hose ends.
NOTE: When disconnecting/connecting the hoses, do not bend the warmer pipes excessively, or they will be damaged or deformed.
2.
Secure the CVTF warmer hoses with the clamps (C).
NOTE:
When securing the clamps, make sure they do not interfere with the surrounding parts.
Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.

6. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.