Under-Dash Fuse/Relay Box Removal and Installation
Special Tools Required
Image
Description/Tool Number
Relay Puller 07AAC-000A2A1
Where icon is shown, click for further information.
SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
1
Detailed information, notes, and precautions
Torque: N·m (kgf·m, lbf·ft)
1.
12 Volt Battery Terminal - Disconnect
2.
Driver's Dashboard Lower Cover - Remove
3.
Under-Dash Fuse/Relay Box - Remove
4.
Relays - Remove
1.
Carefully remove the relays using the relay puller tool.
NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall, not start, or cause other functions to fail.
5.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.