Audio Unit Removal and Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

NOTE:
enu_12713377_2.0 Where icon is shown, click for further information.
When working on electronic components, make sure the work area is clean and dust free.
Make sure your hands are clean and free of oils and grease.


1


3684_3.0_enu_14796217_5.0

enu_12713377_2.0
Detailed information, notes, and precautions
enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)

2. Audio Unit Assembly - Remove

NOTE:
When installing, make sure all the connectors are secure.
After Installation, do the System Links in the System Diagnostic Mode to confirm that there are no problems in the system.

3. Audio Unit Bracket - Remove


5. Volume Knob - Remove

If necessary, remove the knob.

6. All Removed Parts - Install

Install the parts in the reverse order of removal.