Wheel Speed Sensor Removal and Installation
NOTE:
How to read the torque specifications
.
Front
1.
Vehicle - Lift
2.
Front Wheel - Remove
3.
Front Wheel Speed Sensor - Remove
1.
Disconnect the connector (A).
2.
Remove the wire guide rubbers (B), the clips (C), and the bolt (D).
3.
Remove the wheel speed sensor (E).
4.
All Removed Parts - Install
1.
Install all removed parts in the reverse order of removal.
NOTE:
Install the sensor carefully to avoid twisting the wires.
If the wheel speed sensor comes in contact with the wheel bearing, it will become faulty.
Make sure there is no debris in the sensor mounting hole.
Rear
1.
Vehicle - Lift
2.
Rear Wheel - Remove
3.
Rear Wheel Speed Sensor - Remove
1.
Disconnect the connector (A).
NOTE: If the connector lock tab is difficult to release, push in on the connector body before pushing on the release lock.
2.
Disconnect the connector (B).
3.
Remove the clips (C).
4.
Remove the bolts (D).
5.
Remove the wheel speed sensor (E).
4.
All Removed Parts - Install
1.
Install all removed parts in the reverse order of removal.
NOTE:
Install the sensor carefully to avoid twisting the wires.
If the wheel speed sensor comes in contact with the hub bearing unit, it will become faulty.
Make sure there is no debris in the sensor mounting hole.
