NOTE: Although the refrigerant oil information is listed on the under-hood air conditioning information label, always use the recommended refrigerant oil listed in this service manual or "A/C Refrigerant and Oil Type Guid".
P/N 38899-RLV-A01: 40 m L(1 1/3 fl oz)
It is important to have the correct amount of refrigerant oil in the A/C system to ensure proper lubrication of the A/C compressor. Too little oil damages the A/C compressor; too much oil reduces the cooling capacity of the system, and can produce high vent temperatures.
To avoid contamination, do not return the oil to the container once dispensed, and never mix it with other refrigerant oils.
Use the refrigerant oil immediately after opening the container, and dispose of any unused oil. The oil rapidly absorbs moisture, which damages its electrical insulating (for hybrids) and lubricating properties.
Do not spill the refrigerant oil on the vehicle, because it may damage painted surfaces. If refrigerant oil contacts the paint, wash it off with water immediately.
Add the recommended refrigerant oil in the amount listed if you replace any of the following parts:
Parts
Oil Amount
A/C condenser
25 mL (5/6 fl oz)
Evaporator
40 mL (1 1/3 fl oz)
Line or hose
10 mL (1/3 fl oz)
Desiccant
10 mL (1/3 fl oz)
Leakage repair
25 mL (5/6 fl oz)
A/C compressor
77?103 mL (2 3/5?3 1/2 fl oz)*1
95?107 mL (3 1/5?3 3/5 fl oz)*2
*1: 1.5 L engine *2: 2.4 L engine
1.5 L engine
1.
A/C Compressor Oil - Adjustment
1.
Cover the pulley and clutch with plastic bag to prevent from spilling the oil.
*1
2.
Remove the drain bolt, and drain the oil from the drain port.
3.
Tighten new drain bolt and washer to the specified torque.
4.
Refill the oil from suction port.
NOTE: If no oil was drained from the removed A/C compressor, do not drain more than 50 mL (1 2/3 fl oz) from the new A/C compressor.
2.4 L engine
1.
A/C Compressor Oil - Adjustment
NOTE: If no oil was drained from the removed A/C compressor, do not drain more than 50 mL (1 2/3 fl oz) from the new A/C compressor.
