DTC Troubleshooting: C0061-9A, C0062-9A, C0063-9A
DTC C0061-9A: Temporary stop of Integrated Driver Support System (Unstable Lateral Acceleration Sensor Signal)
DTC C0062-9A: Temporary stop of Integrated Driver Support System (Unstable Longitudinal Acceleration Sensor Signal)
DTC C0063-9A: Temporary stop of Integrated Driver Support System (Unstable Yaw Rate Sensor Signal)
NOTE:
These DTCs are recorded when the sensor signal reliability temporarily decreases due to a drop in the power supply voltage supplied to the yaw rate sensor and lateral acceleration sensor built in the SRS unit or for other reason.
If this DTC is recorded, some of the integrated driver support system functions are temporarily canceled but it is not a failure.
When the power supply voltage supplied to the yaw rate sensor and lateral acceleration sensor built in the SRS unit return to normal, the temporarily cancelled integrated driver support system functions are re-activated.
The functions of the integrated driver support system that will be temporarily canceled when this DTC is recorded can be confirmed with the DTC troubleshooting index.

DTC Description
DTC
C0061-9A Temporary stop of Integrated Driver Support System (Unstable Lateral Acceleration Sensor Signal)
 
C0062-9A Temporary stop of Integrated Driver Support System (Unstable Longitudinal Acceleration Sensor Signal)
 
C0063-9A Temporary stop of Integrated Driver Support System (Unstable Yaw Rate Sensor Signal)
 

1.
DTC check:

DTC check
?1.
Turn the vehicle to the ON mode, then wait for at least 6 seconds.

?2.
Check for DTCs with the HDS.
DTC Description
DTC
C0061-9A Temporary stop of Integrated Driver Support System (Unstable Lateral Acceleration Sensor Signal)
 
C0062-9A Temporary stop of Integrated Driver Support System (Unstable Longitudinal Acceleration Sensor Signal)
 
C0063-9A Temporary stop of Integrated Driver Support System (Unstable Yaw Rate Sensor Signal)
 

Is there any DTC(s) other than DTC C0061-9A, C0062-9A, or C0063-9A?

     
YES
     
     
     
Perform a troubleshooting for the recorded DTC.?
     
NO
     
     
     
Clear the DTC with the HDS and explain to the customer that it is not a failure.?