Rear Seat Belt Removal and Installation
NOTE:
How to read the torque specifications
.
SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
1.
Rear Seat Belt Lower Anchor Bolt - Remove
2.
Quarter Pillar Trim - Remove
3.
Rear Seat Belt Upper Anchor Bolt - Remove
4.
Rear Side Trim Panel - Remove
5.
Rear Seat Belt Assembly - Remove
1.
Remove the bolts (A, B).
2.
Remove the rear seat belt assembly (C).
6.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: Assemble the toothed lock washer (A), the collar (B), and the bushing (C) on the upper anchor bolt (D) as shown.
