Receiver/Dryer Desiccant Removal and Installation

1

1780_3.0_enu_14739067_5.0

enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)
enu_12714524_1.0
Replace

2. Desiccant - Remove


3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal, and note these items:
Install the desiccant as quickly as possible to prevent the system from absorbing moisture from the air.
If you are installing a new desiccant, add refrigerant oil.
Replace the O-rings with new ones, and apply a thin coat of refrigerant oil before installing them.
Install the cap to the specified torque. It is made of resin and can be easily stripped.