Hold the crankshaft pulley with the holder handle and the pulley holder attachment.
2.
Remove the pulley bolt with a socket, 19 mm and a breaker bar.
3.
Remove the crankshaft pulley.
NOTE: Where icon is shown, click for further information.
1
Detailed information, notes, and precautions
1.
Crankshaft Pulley - Install
1.
Clean the crankshaft pulley (A), the crankshaft (B), the bolt (C), and the washer (D).
2.
Lubricate with new engine oil as shown.
3.
Install the crankshaft pulley and the pulley bolt.
4.
Hold the crankshaft pulley with the holder handle and the pulley holder attachment, torque the pulley bolt to 70 N·m (7.1 kgf·m, 52 lbf·ft) with a torque wrench and a socket, 19mm.
NOTE: Tighten the pulley bolt. Do not use an impact wrench.