Engine Oil Pump Removal and Installation
Special Tools Required
Image
Description/Tool Number
Engine Support Hanger, A and Reds AAR-T1256*
Universal Lifting Eyelet 07AAK-SNAA120
*: Available through the Honda Tool and Equipment Program 888-424-6857.
1.
Front Bulkhead Cover - Remove
2.
Cowl Cover - Remove
3.
Expansion Tank Bracket - Remove
4.
Turbocharger Joint - Remove
5.
Cam Chain - Remove
6.
Cam Chain Drive Sprocket - Remove
1.
Remove the key (A) and the cam chain drive sprocket (B).
NOTE: Check the direction of the key. When the key is installed, install the key as same direction of the original one.
7.
Sub Hanger Stay - Install
8.
Engine Support Hanger - Install
NOTE: Be careful when working around the windshield.
1.
Remove the front damper caps.
2.
Install the engine support hanger onto the vehicle as shown.
3.
Attach the hook (A) to the slotted hole in the universal lifting eyelet.
4.
Tighten the wing nut (B) by hand, and lift and support the engine.
9.
Oil Pan - Remove
10.
Oil Pump - Remove
1.
Remove the oil strainer (A) and the oil pump (B).
NOTE:
How to read the torque specifications
.
1.
Oil Pump - Install
1.
Install the oil pump (A).
2.
Install the oil strainer (B) with a new O-ring (C).
2.
Oil Pan - Install
3.
Engine - Support
1.
Lift and support the engine with a jack and a wood block under the oil pan.
4.
Engine Support Hanger and Sub Hanger Stay - Remove
5.
Expansion Tank Bracket - Install
6.
Cam Chain Drive Sprocket - Install
1.
Install the cam chain drive sprocket (A) and the key (B).
7.
Cam Chain - Install
8.
Cowl Cover - Install
9.
Front Bulkhead Cover - Install
10.
Engine Oil - Refill