CVTF Warmer Removal and Installation

NOTE:

Where icon is shown, click for further information.

Keep all foreign particles out of the transmission.

	Detailed information, notes and precautions
	Torque: N·m (kgf·m, lbf·ft)
	Replace

1.	Engine Coolant - Drain

2.	Air Cleaner - Remove

3.	Throttle Body Inlet Pipe - Remove (1.5 L engine)

4.	Connector (Solenoid Wire Harness A) - Cover

NOTE: To prevent damage, cover the connector located under the CVTF warmer using a shop towel.

5.	CVTF Warmer Hose - Disconnect

NOTE: When disconnecting/connecting the hoses, do not bend the warmer pipes excessively, or they will be damaged or deformed.

6.	CVTF Warmer - Remove

7.	CVTF Warmer Strainer - Remove

Clean the CVTF warmer strainer if necessary. Replace the CVTF warmer strainer, if it is clogged or damaged.

NOTE:

Do not use compressed air to clean the CVTF warmer strainer.

Soak the CVTF warmer strainer thoroughly in transmission fluid.

8.	All Removed Parts - Install

Install the parts in the reverse order of removal.

NOTE:

Apply a light coat of clean transmission fluid on all O-rings before installation.

Make sure the O-rings are firmly installed in the grooves.

Make sure the CVTF warmer strainer is installed in the correct direction.

Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.

9.	Engine Coolant - Refill