Dashboard Removal and Installation

NOTE:

Where icon is shown, click for further information.

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

	Detailed information, notes, and precautions
	Torque: N·m (kgf·m, lbf·ft)
	Replace

1.	12 Volt Battery Terminal - Disconnect

NOTE: Wait at least 3 minutes before starting work.

2.	Both A Pillar Trims - Removal

3.	Meter Visor - Remove

4.	Gauge Control Module - Remove

5.	Driver's Dashboard Side Lid - Remove

6.	Driver's Dashboard Undercover - Remove

7.	Passenger's Dashboard Undercover - Remove

8.	Driver's Dashboard Lower Cover - Remove

9.	Driver's Lower Ornament Panel - Remove

10.	Driver's Outlet - Remove

11.	Driver's Dashboard Outer Panel - Remove

12.	Climate Control Panel - Remove

13.	Audio Unit - Remove (With Audio Unit)

14.	Audio-Navigation Unit -Remove (With Audio-Navigation Unit)

15.	Driver's Dashboard Inner Panel - Remove

16.	Center Outlet - Remove

17.	Passenger's Lower Ornament Panel - Remove

18.	Passenger's Outlet - Remove

19.	Glove Box - Remove

20.	Passenger's Dashboard Side Lid - Remove

21.	Dashboard Center Lower Cover Assembly - Remove

22.	Sunlight Sensor - Remove

23.	Dashboard - Remove

24.	Dashboard Passenger's stay - Remove

If necessary, remove the dashboard passenger's bracket (A).

25.	All Removed Parts - Install

Install the parts in the reverse order of removal.