Transmission Mount Removal and Installation
1
Torque: N·m (kgf·m, lbf·ft)
Replace
1.
12 Volt Battery - Remove
2.
Air Cleaner - Remove
3.
12 Volt Battery Base - Remove
4.
Engine Undercover Lid - Remove
5.
Transmission - Support
1.
Lift and support the transmission with a jack and a wood block under the transmission.
6.
12 Volt Battery Base Bracket - Remove
7.
Ground Cable - Disconnect
8.
Transmission Mount - Remove
9.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
Do the mounts tightening procedure before tightening all of the mounts' bolts and nuts.
