Intake Manifold Removal and Installation (1.5 L Engine)

Intake Manifold Removal and Installation

	Torque: N·m (kgf·m, lbf·ft)
	Replace

1.	Air Cleaner - Remove

2.	Throttle Body - Move

NOTE:

Do not disconnect the water bypass hoses.

Do not bend the water bypass hoses excessively.

3.	Intake Manifold Bracket - Remove

4.	MAP Sensor - Remove

5.	Turbocharger Bypass Control Solenoid Valve - Remove

6.	Insulator - Remove

7.	Intake Manifold - Remove

8.	All Removed Parts - Install

Install the parts in the reverse order of removal.

NOTE:

Tighten the bolts/nuts in three steps; tighten the bolts/nuts until the bolts/nuts sit on the intake manifold, tighten the bolts/nuts until the gasket is compressed, tighten the bolts/nuts to specified torque.

After installation, check that all tubes, hoses, and connectors are installed correctly.